News
Contact Us
Guangdong Granville Laser Technology Co. Ltd.
Contact:Mr.Zhou
Phone:+86 137 1240 0052
Tel:0769-28826357
Fax:0769-28826357
HOtline:4000-829-388
Website:www.weifalaser.com
E_mail:2418746001@qq.com
Address:Guangdong province Dongguan City Wanjiang liuyongwei Industrial Park Changmao Ming community
Laser cutting machine auto focus is an important function
Laser cutting machine cutting metal sheet has an unparalleled advantage, it is not only high precision and smooth section without burrs, whether it is cutting thick plate or sheet can achieve good results, however, these effects are with the focus of laser cutting machine Control is not off the relationship, just like SLR camera focus, to achieve a better imaging effect is a principle.
So what is the focus control? Familiar with laser cutting machine friends know that laser cutting machine in the cutting of different materials and different thickness of the plate, in order to achieve better cutting effect, the focus of the laser beam will be set in different places, that is what we call the tone Coke
In the laser cutting application to get up early, focusing the main way is to rely on manual to complete, and now with the development of laser technology, this manual focus has been gradually eliminated, auto focus function has begun to slowly achieve, such as high energy Laser full range of laser cutting machines are equipped with automatic focusing function. So, some people will say that the optical path is integrated in the cutting head inside, by changing the height of the cutting head is not to achieve the focus function yet? The cutting head is raised, the focus position is high, the cutting head is lowered, the focal position is low. However, the fact that there is no imagination so simple.
The tip of the cutting head is the nozzle. During the cutting process, the distance between the nozzle and the workpiece (nozzle height) is about 0.5 ~ 1.5mm, which may be regarded as a fixed value, that is, the nozzle height can not be changed by lifting the cutting head Coke (otherwise it can not finish cutting).
The focal length of the focusing lens is irrevocable, so it can not be expected to focus by changing the focal length. If you change the position of the focus lens, you can change the focus position: focus lens down, the focus down, focus lens rise, the focus rises. - it is a way of focusing. The use of a motor-driven focusing lens for up and down movement, you can achieve automatic focus.
Another way to focus automatically is to change the focus position by changing the curvature of the mirror and changing the divergence angle of the reflected beam before changing the curvature mirror (or tunable mirror) before the beam enters the focusing mirror.
With automatic focus function, in the processing of different materials, different thickness of the workpiece, the machine can automatically adjust the focus to the most appropriate location. This can significantly improve the processing efficiency of laser cutting machine, thick plate piercing time will be greatly reduced.